FADOS7F1 Fault Detector and Oscilloscope
Features:
- Dual - Channel Fault Detection by V / T tester (Analog Signature Analyzer - Trouble Shooting)
Fault detection by direct comparison of the current-voltage characteristics (signatures) of a working and a faulty circuit board without applying power to the unit under test - Fault Detection by Comparison with Stored Signatures (Memory)
Signatures of a functioning board can be saved and used at a later time as a reference for troubleshooting a faulty board. The point to touch can be indicated by a cross hair mark at an image of the board - Equivalent Circuit Diagram
Display of an equivalent circuit that corresponds to the characteristic on the touched point - Display Values of Resistor, Capacitor and Diode Threshold
Display the calculated values of resistance, capacitors and diode threshold voltages corresponding to the conditions at the contacted node - Dual - Channel Digital PC Oscilloscope
As occasion may require, device can be used as oscilloscope - 0.2... 25KHz Square Wave Signal Output
Channel 2 is used as a square wave generator. Channel 1 can be used as an oscilloscope - Analogue Voltage Output (2,5 mV Sensitivity)
Channel 2 is used as Analog DC output -10 V +10 V. Channel 1 can be used as an oscilloscop
Talk To Us Now
Dynamics Circuit Tech. Phils. Inc.
18 Argentina St. Brgy. Don Bosco, Better living, Paranaque City
Philippines 1700.
Contact: +6328320609 , +6326976933
Email: etagle@dynamicscircuit.com , mimi@dynamicscircuit.com
Or visit us www.dynamicscircuit.com
Facebook Page: @dynamicscircuitphils
Office Hours : Monday to Friday 9:00am to 6:00pm